MARPE for Adults: A Guide to Non-Surgical Palate Expansion

MARPE for Adults: A Guide to Non-Surgical Palate Expansion

May 26, 2025 | Mars Orthodontics

MARPE appliance used for non-surgical palate expansion at Mars Orthodontics

For decades, the prevailing view in orthodontics was that once an adult’s midpalatal suture had fused, the upper jaw could no longer be widened without surgery. Many adults are still told today that the only option to address a narrow upper jaw is a surgical procedure such as SARPE (surgically assisted rapid palatal expansion), performed by an oral and maxillofacial surgeon.

That view has changed. Modern miniscrew-supported expansion techniques, supported by 3D imaging and specialist-led treatment planning, now allow many adult patients to achieve true skeletal expansion of the upper jaw without surgery.

The technique is called MARPE (Miniscrew-Assisted Rapid Palatal Expansion). At Mars Orthodontics in South Brisbane, we deliver MARPE through our own protocol, which we call MARS-PE: a personalised, specialist-designed approach to adult palatal expansion. Whether you have seen it written as MARS-PE or MARSPE, both refer to the same approach.

This article explains how MARPE works, what the MARS-PE protocol is, how it is delivered, and what adult patients considering non-surgical palate expansion should understand before treatment begins.

What is MARPE and the MARS-PE Protocol?

MARS-PE is the protocol used at Mars Orthodontics for adult and late-adolescent palatal expansion. The acronym describes the framework:

  • M: Miniscrew
  • A: Assisted
  • R: Rapid, until the suture separates, then
  • S: Slow, with Invisalign running alongside
  • PE: Palatal Expansion

The central principle of MARS-PE is straightforward: the protocol is matched to the patient, not the patient to the protocol. Every appliance is custom-designed by the treating specialist based on detailed CBCT-based planning, and the bite plan that runs alongside expansion is set for the individual patient.

MARS-PE personalisation also extends to addressing the bite at the same time as the transverse problem. Where clinically indicated, expansion is combined with additional orthodontic mechanics to address Class II or Class III tendencies, so the treatment is doing more than one job concurrently. The specific combinations are determined case by case at the specialist assessment.

Why a protocol, not just an appliance

Most adult palatal expansion is described in terms of the appliance used. The MARS-PE Protocol is described in terms of the clinical framework that surrounds the appliance: how the patient is assessed, how the appliance is designed, how the expansion is paced, and how the rest of the bite is managed alongside expansion.

This matters because the appliance is only part of the result. The number and position of the miniscrews, how the gap between the front teeth is managed, and how the aligners run alongside the expansion all depend on the individual patient, and deciding them is what the protocol is for.

MARS-PE is the framework that determines how expansion is planned for each patient, and how the broader bite is managed during the same treatment period.

Why the specialist assessment matters

Dr Carmen explaining a CBCT airway assessment to a patient at Mars Orthodontics

Adult palatal expansion is not a single decision. It is a series of decisions that need to be made together: whether expansion is possible without surgery, how much expansion is required, which appliance design fits the patient’s anatomy, how the expansion will be paced, and how the bite will be managed during and after expansion.

These decisions are made by the specialist orthodontist through a thorough clinical assessment. Diagnostic imaging supports that assessment by giving the specialist the detailed information they need.

At Mars Orthodontics, the assessment is supported by two imaging technologies that work together:

  • 3D CBCT imaging with the Planmeca Viso G7 captures the underlying skeletal structures: the bone, the midpalatal suture, the nasal floor, the position of dental roots, and the airway.
  • iTero Lumina digital scanning captures a high-resolution 3D surface scan of the teeth and bite, replacing the need for traditional impressions.

These two datasets are then superimposed in specialist treatment planning software, merging the skeletal view from the CBCT with the precise surface anatomy from the iTero into a single 3D model. This allows expansion to be planned against the patient’s actual bone and teeth together, not just the visible surface or the skeletal view alone. It is one of the technical foundations that allows MARS-PE to be planned with the level of detail it requires.

The assessment also identifies whether you may need to see other health professionals as part of your treatment plan. Depending on the case, this may include referrals to a periodontist, a sleep physician, an ENT specialist, an oral and maxillofacial surgeon, a myofunctional therapist, or a physiotherapist. If you are already working with other health professionals, we welcome their involvement, because a collaborative approach often produces the best result.

It is also important to be honest about what MARPE can and cannot do. MARPE widens a narrow upper jaw. It is not a solution for every problem. Complex cases involving significant facial asymmetry, a severe jaw discrepancy, or a skeletal open bite may still require orthognathic surgery, and MARPE does not change that. The appliance itself sits on the roof of the mouth and affects speech during treatment. Many patients notice a lisp while the expander is in place, particularly with “s” and “th” sounds. Most adapt over time, though some find it takes longer than expected. Some patients also have concerns such as TMJ symptoms that may need their own therapy. These things are discussed openly at your assessment so you have a clear and honest picture of what your treatment involves and what it can realistically achieve.

At the initial consultation, the records are taken and the patient receives a clear overview of their case: whether non-surgical expansion is realistic, the likely treatment direction, an honest sense of timeline, and where the case sits in terms of complexity. The detailed appliance design and pathway planning is extensive work that takes place after the consultation, once the patient has decided to proceed. The next in-person appointment after that is the fitting of the appliance and the start of treatment.

Rapid until the suture separates, then slow

A defining feature of the MARS-PE Protocol is that expansion runs in two stages. Turning starts at a rapid rate until the suture separates, which shows as a small gap between the upper front teeth. From then on expansion is slow, with Invisalign running alongside it. The two are stages of one protocol, not alternatives, and your own turning schedule is given to you at your fitting.

Stage one: rapid turning until the suture separates

This stage is short by design. It opens the suture; it does not do the widening. The sign that it has worked is a small gap between the upper front teeth, at which point turning slows and the next stage begins.

Stage two: slow turning with concurrent Invisalign

  • Slow turning once your scans are taken and your Invisalign aligners begin, on the schedule given at your fitting.
  • An active expansion phase that scales with the amount of expansion required.
  • Because expansion and tooth alignment happen together, the gap between the front teeth is held small and closed by the aligners as treatment goes on, rather than opened wide and closed later.
  • A gentler pace, with regular clinical review points along the way and the option to adjust if the response differs from what was anticipated.

This stage does the widening. Adults treated with Damon braces follow the same slow expansion, with the gap kept as small as the braces allow. Suitability for MARPE, and for concurrent Invisalign, is determined at the specialist assessment.

Managing the midline gap

Because the aligners run alongside the slow stage, the midline gap is held small and closed as treatment goes on rather than opened wide and closed afterwards. How quickly the last of it closes depends on more than its size. The factors include:

  • The amount of expansion performed and the resulting size of the gap
  • The state of the rest of the bite: overjet, overbite, crossbite resolution
  • Anchorage requirements, whether other teeth need to stay still or move with the gap
  • Whether closure is being performed with fixed appliances or aligners
  • Whether other tooth movements are happening concurrently
  • Patient compliance with aligner wear, elastics, and other prescribed components of treatment

Under continuous orthodontic force, the rate of orthodontic tooth movement during space closure is typically in the order of 0.5 to 1 millimetre per month (Dixon et al., 2002), but the actual closure timeline depends on how the gap interacts with the broader treatment plan.

What MARPE addresses, and what it does not

MARS-PE addresses transverse deficiency, meaning a narrow upper jaw. If the main skeletal issue is that the upper jaw is too narrow, MARS-PE can often replace surgical expansion (SARPE) in carefully selected adult patients.

If there is also a significant Class II or Class III skeletal discrepancy, marked facial asymmetry, or a skeletal open bite, orthognathic surgery may still be required to correct those components of the problem.

In these more complex cases, MARPE does not necessarily eliminate the need for jaw surgery. What it may do, however, is simplify the surgical pathway. Rather than requiring two separate surgical procedures, one to widen the upper jaw through SARPE and another to correct the jaw position, the widening of the upper jaw may instead be managed non-surgically with MARPE through the MARS-PE, also written as MARSPE, protocol. This may leave only the orthognathic procedure required to address the jaw discrepancy itself, which may involve single-jaw or double-jaw surgery Where orthognathic surgery forms part of the treatment plan, the final surgical approach and sequencing will be determined in conjunction with the Oral and Maxillofacial Surgeon (OMFS).

A specialist orthodontic assessment with CBCT imaging is the only reliable way to determine what an individual case requires.

What patients experience during MARPE

Adults considering MARPE often ask what daily life is like during the expansion phase:

  • Activations. You turn the appliance yourself at home on the schedule given at your fitting: rapid until the suture separates, then slow.
  • Pressure and tightness after activation are most noticeable in the first days of turning and generally mild once turning slows, though some patients still notice a sensation in the palate, nose, and cheeks for a few hours after each activation.
  • Eating and chewing will need some adjustment. The expander is a bulky appliance fixed to the roof of the mouth. Chewing patterns adapt over the first one to two weeks, and patients are guided through what foods work best during treatment. The bite is a work in progress during expansion, and this is something
    patients should expect and plan for.
  • Speech is affected by the appliance. Because the expander sits on the roof of the mouth, many patients notice a lisp while it is in place, particularly with “s” and “th” sounds. Most patients adapt over time, though some find it takes longer than expected. This is a normal part of treatment and is discussed honestly at your assessment.
  • Clinical reviews are scheduled regularly to monitor progress, check the miniscrews and soft tissues, and adjust the plan if needed.

Common questions about MARPE

Will I have a gap between my front teeth?

A small one. Turning slows as soon as a small gap shows that the suture has separated. From then on your Invisalign runs alongside the expansion, so the gap is held small and closed by the aligners as treatment goes on, rather than opened wide and closed later.

Is the schedule the same for everyone?

For adults, yes: rapid turning until the suture separates, then slow expansion with Invisalign alongside. What is individual is the appliance, designed from your own CBCT, the turning schedule you are given at your fitting, and the bite plan that runs with it. Teenagers, whose sutures are more open, usually have a larger gap that forms and closes faster; that is decided case by case at the assessment.

I have been told I need surgery to widen my upper jaw. Can MARPE help?

In many cases, yes. MARPE addresses transverse deficiency, so if the only issue is a narrow upper jaw, it can often replace surgical expansion in carefully selected adult patients. If there is also a significant Class II or Class III skeletal discrepancy (where the jaws are also out of alignment front-to-back), orthognathic surgery may still be required for that separate component. The full assessment determines what your case requires.

How MARPE is delivered at Mars Orthodontics

Mars Orthodontics is a small boutique specialist orthodontic practice in South Brisbane, dedicated to personalised, specialist-led care. MARS-PE treatment is planned and designed by Dr Carmen Karadeniz, registered specialist orthodontist, and delivered by her husband Dr Ersan Karadeniz, who places and fits the MARPE appliances. As a husband-and-wife team, the two of them personally guide you through every stage of treatment, from your first assessment through to retention. You are personally cared for by Dr Carmen and Dr Ersan at every stage, with no associates or rotating clinicians.

Both Dr Carmen and Dr Ersan undertake ongoing learning with leading clinicians and pioneers of adult palatal expansion in the USA, integrating contemporary evidence-based protocols into their adult expansion cases.

Each case begins with a specialist orthodontic assessment that includes Planmeca Viso G7 CBCT imaging, iTero Lumina digital scanning, and airway assessment. The two datasets are superimposed to plan expansion against the patient’s underlying bone and surface anatomy together. The appliance is then custom-designed for the patient before being fitted at the next appointment, with the activation schedule and bite plan locked in from the outset.

You may also wish to read What to Expect at a MARPE Consultation, learn more about MARPE treatment at Mars Orthodontics, or read Can Adults Get a Palate Expander?.

References:

  1. Dixon V, Read MJF, O’Brien KD, Worthington HV, Mandall NA. A randomized clinical trial to compare three methods of orthodontic space closure. Journal of Orthodontics. 2002;29(1):31–36.
  2. Cantarella D, Dominguez-Mompell R, Moschik C, et al. Midfacial changes in the coronal plane induced by microimplant-supported skeletal expander, studied with cone-beam computed tomography images. American Journal of Orthodontics and Dentofacial Orthopedics. 2018;154(3):337–345.
  3. Lin L, Ahn HW, Kim SJ, Moon SC, Kim SH, Nelson G. Tooth-borne vs bone-borne rapid maxillary expanders in late adolescence. Angle Orthodontist. 2015;85(2):253–262.

 

Phone

(07) 2111 7999

Email

smile@marsorthodontics.com.au

Address

Shop 14, Southpoint,
275 Grey St, South Brisbane

Get in Touch

Have questions? We're here to help. Fill out the form below, and we'll get back to you shortly.

Take the Next Step

If you have been told you need surgery to widen your upper jaw, or you have been advised that adult palate expansion is not possible, a specialist orthodontic assessment with detailed 3D imaging can clarify whether MARPE is appropriate for your case.

aao-american-association-of-orthodontists-vector-logo-small
ASA
EAS
imgbin-australian-dental-association-dentistry-american-dental-association-australia-W6G62div2dt3fXVkzbdQAbkdC232435
invisalign-provider-logo-rgb
Damon-System-Premier-Provider
Logo with text (High Res)
sadfsaefdsse
OIP